Sig-sauer 1911 Bedienungsanleitung

WARNINGPlease read and understand thisowner’s manual before taking yournew SIGARMS pistol out of the box. Itis vital to your safety and to the safetyo

NOTE: Some cleaning solvents may be harmful to the finish of your pistol. Readthe solvent manufacturer’s product use instructions and warning labels b

• For repairs or service work, however, we recommend that you return your pis-tol to SIGARMS, who always holds a full range of replacement parts in st

6.1 WARRANTYBased on the Magnuson-Moss Warranty Act, SIGARMS Inc. offers no expresswarranty on their product line. However, SIGARMS Inc. recognizes it

or armorer.UNAUTHORIZED ADJUSTMENTS OR PARTS REPLACEMENT CAN VOIDYOUR SERVICE POLICY.If you order a part without returning the pistol to SIGARMS Inc.,

24 2537. Slide38. Extractor39. Extractor pin40. Front sight41. Rear sight42. Firing pin 43. Firing pin spring 44. Firing pin stop 45. Firing pin plung

26IMPORTANT Do not discard. Keep this manual with your firearm.Upon change of ownership, transfer this manual withthe firearm.Be aware of those around

You are now the owner of one of the world’s finest and most superbly producedfirearms. The SIGARMS Granite Series semiautomatic pistol has been crafte

This limitation applies regardless of whether liability is asserted on the basis ofcontract, negligence or strict liability (including any failure to

2.1 MAIN PARTSIn conventional gun terminology, the position of pistol parts are described asthey occur with the pistol horizontal and in normal firing

Safety intercept notchThe safety intercept notch is a passive safety device that prevents the hammerfrom falling if the primary sear notch fails. It a

3.3 LOADING THE MAGAZINE• Press down on the magazine follower with the cartridge case rim.• Push the cartridge to the rear and under the magazine li

• Place your hand under the magazine to prevent it from falling and press themagazine catch to release and eject the magazine.• If all of the rounds o

4.2 TROUBLESHOOTING GUIDEMALFUNCTION CAUSE CORRECTIONFeed:No round fed into thechamberMagazine not properlyinserted or magazine isdeformed or dirtyIns

3. Pull the slide back about 1/4 inch. Press down on the recoil spring plug whilerotating the barrel bushing clockwise about l/4 turn (see Figure 5).