2.1.7. MagazineThe magazine is transparent and has a capacity of 5,10,20and 30 rounds. On either side of the 20 and 30 roundscasing there is a mechani
202.3. AccessoriesEvery SG 552 has the following accessories:• carrying sling• loading tool• cleaning kit21Accessories2.2. Technical specifications SG
3.3. Unloading1. Put safety lever to position “S”.2. Swing trigger guard into vertical position.3. Remove magazine by pressing magazine catch.4. Carry
3.7. Aiming, firing and adjusting with diopter sight3.7.1. Aiming and firingTo aim, align the eye, diopter or battle sight, foresightand target. When us
ElevationHigh shots are corrected by turning the elevation correc-tion screw to the left. Low shots are corrected by turningthe screw to the right.Win
3.9. Gas valve positionWith the SG 552, the gas volume required for the func-tion of the weapon can be controlled by the gas valve.Position I (Rib of
3.12. Rifle Grenades (Bullet trap type)3.12.1. GeneralThe rifle grenades are intended to be launched in flat trajec-tory. Standard, live ammunition is us
3.13. Use of accessories3.13.1. Carrying slingOne end of the sling hooks into the lug on the foresightmount; the other end is attached to the butt sto
11. Press down the gas valve catch. Simultaneously twist and pull the gas valve to extract it.12. Press down the gas valve catch. Rotate gas valvethro
3.15. AssemblyThe weapon must always be assembled in the reverseorder of stripping:1. Assemble magazine.2. Install firing pin:•Insert firing pin and spr
The safety warnings in this booklet are important. By understanding the dangers inherent in the use of anyfirearm, and by taking the precautions descri
11. Fitting trigger housing:- Cover bore of front trigger housing bolt.- Depress trigger housing bolt to stop.- Press recoil spring with spring guide
3.17. Procedure in case of malfunctionWhenever an SG 552 no longer works due to a malfunction, proceed as follows.•Carry out loading movement.• Contin
4.1.3. Cleaning after malfunctioningThe SG 552 must be cleaned whenever the gas valve isswitched to position II. After cleaning, all moving partsshoul
4.2.3. Greasing and degreasingSequence of operations:1) Unload the weapon2) Remove the bolt3) Clean from the chamber down4.2.4. Daily cleaningDuring d
The bolt assembly moves back along the rails in thereceiver (16) as far as the stop (17) whereby:• the recoil spring (2) is compressed;• the hammer (7
5.2.2. Trigger in safe position "S”The safety lever (6) is set to "S”. The safety shaft (7) locks the trigger (8).5.2.3. Semiautomatic fireTh
5.2.4. 3-round burst control systemThe safety lever (6) is set to "3”. The automatic fire pawl(11) lies in the groove of the safety shaft (7). The
When the third round is fired – just like the second round– via the release bar, the segment (10), pressed by thechargeover (14) jumps on the driving c
This trigger function is only interrupted when the trigger (8) is released. In doing so the link between the automaticfire pawl (11) and the trigger ro
6. Appendix6.1. List of parts100 Receiver (diopter version)111 Receiver casing141 Bolt cover142 Rivet151 Rear sight drum152 Drum spring153 Drum stud15
•A shot sounds weak or abnormal. In such cases it ispossible that a bullet is lodged part way down the bar-rel. Firing a subsequent bullet into the ob
600 Butt611 Butt stock612 Butt catch613 Butt catch spring614 Clip615 Spring pin616 Butt plate700 Magazine711 Magazine casing712 Magazine floorplate713
Appendix60illu. 76) SG 552 with picatinny rail
SAN Swiss Arms AGIndustrieplatzPostfach 1071CH-8212 Neuhausen am RheinfallSwitzerlandwww.swissarms.chSubject to change without notice.Art. Nr. 34 931
Firing1 Keep the muzzle pointed in a safe direction and yourfinger away from the trigger when cocking any firearm.2 Never carry about or leave unattende
A firearm is a precision instrument and some replacementparts will require individual fitting to insure correct opera-tion. A wrong part, improper fittin
2. Weapon theory2.1. Weapon description2.1.1. GeneralThe SG 552 is a gas operated weapon with rotary boltmechanism.SG 5521) standard version with diop
SG 552 LB3) long barrel version with diopter sight.SG 552 LB4) long barrel version with picatinny rail with flip up front and rear sight.The rifle SG 55
2.1.4. HandguardThe handguard protects the barrel and the gas systemfrom damage and provides protection from burning. 1 Handguard, upper part2 Handgua
2.1.6. Diopter Sights mechanismThe diopter sights mechanism comprise the rear sightand foresight.The rear sight is made up of the:•Rear sight mount•Di
Kommentare zu diesen Handbüchern